EcoQuip2 EQs Elite
The EcoQuip 2 EQs Elite is built for contractors that want the best. Equipped with a stainless steel crash frame and enclosure, hose rack, step, media strainer, water dose valve and a media shelf, this fully-loaded system makes it easy to get setup faster and start making money.
• Fits inside a six-foot truck bed for easy transport
• Step and media shelf for faster media loading
• Max blast pressure of 175 PSI
• Handles both low and high air flow/pressure applications
• Crash frame supports 5x lift rating of machine
• 6.5 cubic ft. specialty coated pot
|Maximum Fluid Working Pressure||175 psi|
|Operating Temperature||35˚ - 110˚ F|
|Recommended Compressor Size+||185-900 CFM|
|Blast Hose Size (supplied)||1.25" ID|
|Abrasive Capacity*||880 lbs.|
|Dry Weight||1070 lbs.|
|Wet Weight*||3120 lbs.|
|Pressure Pot Volume||6.5 cubic feet|
|Water Tank Volume||115 gallons|
|Air Inlet Connection†||1–1/2 npt|
|Air Supply Hose Minimum ID|
|185–600 CFM, <100 ft. hose length||1.5 in. ID|
|Over 600 CFM, > 100 ft. hose length||2 in. ID|
|Sound Pressure Level**||133 dB(A)|
|Sound Power Level**||139 dB(A)|
|Instantaneous Sound Pressure Level**||131 dB(C)|
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more detail).
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications.
Compact, portable blast equipment for restoration & light commercial applications.
Powerful, portable and professional grade.
Truck-ready, high performance, industrial grade abrasive blaster.
A fully loaded, high production system.
Two pots and two nozzles on one skid.
Not sure what equipment you need?
Let the blasting experts at Blastall guide you through the process. Call John and John at 1-905-774-1640 or click the button to fill out our web form.