
EcoQuip2 EQm
Compact, fully portable entry-level unit
The built-in hand truck with over-sized wheels makes the EQm easy to move around the jobsite. Don't let the size fool you, this compact blaster is capable of handling any type of project, from cleaning to surface preparation.
• Fits in the bed of most standard pickup trucks
• blast pressure ranging from 30-175 PSI
• Oversized wheels for easy portability
• Pot size of 3.5 cubic ft - holds approximately (8) 55 lb bags of media
SPECIFICATIONS | |
Maximum Fluid Working Pressure | 175 psi |
Operating Temperature | 35˚ - 110˚ F |
Recommended Compressor Size+ | 185-600 CFM |
Blast Hose Size (supplied) | 1.25" ID |
Abrasive Capacity* | 440 lbs. |
Dry Weight | 370 lbs. |
Wet Weight* | 900 lbs. |
Pressure Pot Volume | 3.5 cubic feet |
Water Tank Volume | 115 gallons |
Air Inlet Connection† | 1–1/2 npt |
Air Supply Hose Minimum ID | |
185–600 CFM, <100 ft. hose length | 1.5 in. ID |
Over 600 CFM, > 100 ft. hose length | 2 in. ID |
Sound Pressure Level** | 133 dB(A) |
Sound Power Level** | 139 dB(A) |
Water Inlet Connection | 3/4 in. garden hose(C) |
Sound Power Level** | 139 dB(A) |
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more detail).
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications.

EQp Restoration+
Compact, portable blast equipment for restoration & light commercial applications.

EQm
Powerful, portable and professional grade.

EQs
Truck-ready, high performance, industrial grade abrasive blaster.

EQs Elite
A fully loaded, high production system.

EQs Dual Line
Two pots and two nozzles on one skid.
Not sure what equipment you need?
Let the blasting experts at Blastall guide you through the process. Call John and John at 1-905-774-1640 or click the button to fill out our web form.